Simplification and applicability studies of a hydrogen-air detailed reaction mechanism

The research of hydrogen fuel internal combustion engine (HICE) had great significance facing the challenges of energy and environmental problems. Based on the detailed hydrogen-air reaction mechanism, the pre-mix model of CHEMKIN-Pro software was selected to simplify the detailed mechanism GRI-3.0. The most important elements and reactions was chose to construct framework mechanism firstly based on the sensitivity coefficient for H₂O and NO formation, and additional elements and reactions were added to framework mechanism for complementing the oxidation path of N2 and H₂. A simplified mechanism including 24-step elementary reaction was obtained and the laminar burning velocity calculated by this simplified mechanism matches well with the detailed mechanism in a wide range. This simplified mechanism was also applied in a CFD model which predicted the cylinder instantaneous pressure and NOx emission accurately within a large range of fuel air equivalent ratio. Showing that this mechanism has good applicability.     

New Approach to Structure–Property Correlations of Different Films of Sorbitan Esters and Their Self-Assembly into Viscoelastic Monolayers

This publication is focused on the structural origin of viscoelasticity in Langmuir monolayers. To improve the understanding of the structural origin of viscoelasticity of surfactant films, we systematically studied interfacial films of different sorbitan esters with saturated (Span 60 and 65) and unsaturated (Span 80 and 85) paraffin chains by means of surface rheology, Langmuir isotherms, X-ray reflectometry (XRR), and Brewster angle microscopy (BAM). The results of two-dimensional shear rheological measurements revealed the existence of temporarily cross-linked networks. In dynamic BAM experiments, we observed a swinging motion of the monolayers as a result of a sudden externally initiated mechanical perturbation. The viscoelastic film response, which relaxed with time as the external force vanished, could be traced back to the presence of foam-like supramolecular structures that interlinked solid-condensed domains. The temperature dependence of the elastic response implied that the solid domains decomposed at temperatures close to the bulk melting point of Span 60 and Span 65. We concluded that insoluble surfactants formed solid domains at the interface, which were linked with each other by nonsolid areas, giving viscoelastic films. These newly discovered insights into coherent film formations could provide new opportunities for designing mechanically stable surfactant interfaces.     

径向弹簧蓄能密封结构最大接触应力的有限元分析

为研究径向弹簧蓄能密封结构的密封特性，针对典型径向弹簧蓄能密封结构，分析其密封机制以及O形弯曲金属螺旋弹簧的弹性特性；采用ANSYS有限元分析软件，建立典型弹簧蓄能密封结构的非线性有限元分析模型，对弹簧蓄能密封圈在不同压缩率、不同介质压力下的接触应力进行分析，研究在多种工况下最大接触应力的变化情况。结果表明：压缩率保持不变时，最大接触应力随着介质压力的增大而增大；介质压力保持不变时，随着压缩率的增大，最大接触应力先增大再减小。对压缩率、介质压力与最大接触应力的关系进行曲线拟合，可用于指导弹簧蓄能密封结构的精确设计。     

重力注水过程流动不稳定现象关键影响因素研究

重力驱动注水过程中由于流量较小以及蒸汽的积聚可能导致流动不稳定现象的发生，对核反应堆安全运行具有重要的影响。通过实验研究的方法，搭建了重力注水模拟实验装置，研究了不同蒸汽出口形阻、高位储水箱水位和加热棒初始温度下流动不稳定现象的变化规律。结果表明，重力驱动注水过程流动不稳定现象包含冷却水初次注入阶段、注入水逐出阶段和冷却水再注入阶段等。在一定冷却水初始温度、冷却水入口形阻以及系统压力下，蒸汽排出速度以及实验本体内筒顶部的聚集情况取决于蒸汽出口形阻，减小蒸汽出口形阻可加快蒸汽排放速度，压力峰峰值降低、振荡周期变长，有利于系统稳定；提高高位储水箱水位加快了冷却水注入速率，增加了加热棒被淹没率，降低了流动不稳定现象的发生次数和持续时间；随加热棒初始温度的升高，冷却水流量出现了波动向停滞的转变，流动不稳定现象发生的次数增加且持续时间加长。     

自然循环工况下离心泵阻力特性的实验研究与数值模拟

停转后泵的阻力特性对自然循环流量影响明显。为研究低流量自然循环工况下离心泵的阻力特性，设计了实验台架，对离心泵的正向压降、反向压降和损失系数进行了测量，实验雷诺数为2.0×10⁴～1.5×10⁵。实验表明：相同雷诺数下，反向压降明显高于正向压降；雷诺数大于8×10⁴时，损失系数基本保持不变，而低雷诺数下损失系数随雷诺数的降低有增大的趋势；基于实验得到了损失系数的经验关系式。采用CFD方法对离心泵的内部流场进行了模拟，计算表明：CFD方法能较好地预测损失系数，RNG k-ε模型与实验值的相对误差不超过10%；离心泵的压力损失主要集中在叶轮、导叶等结构的交界区域；正向与反向流动的流场分布存在显著区别；低雷诺数下局部流动更加不稳定。     

Reformate-enriched gasoline-ethanol blends: Volatility criteria and azeotrope formation

Four hydrocarbon-base gasolines (BG) were formulated from the local refinery streams; isomerate, reformate, and light naphtha. The formulations were enriched in reformate. Each of these BG formulations was blended with 10 vol% of anhydrous ethanol. From ASTM-D86 distillation data, eight distillation curves were constructed and the trend line equations of these distillation curves were developed. Also, the area under each distillation curve (AUDC) was calculated through calculus definite integration technique. Subsequently, the area due to azeotrope formation (ADAF) for each BG-ethanol blend was estimated. In this paper, the influence of increasing reformate proportions on the created positive azeotrope, was studied. Also the influence of increasing reformate proportions on vapor pressure, Temperature for the vapor-liquid ratio of 20, T50 and octane number was studied. The results show that the R² values of the distillation curve equations prove the reliability of the fits. Also, increasing reformate proportion in the fuel blend improves the octane number while increasing reformate proportion decreases the volatility of the fuel formulation.     

基于有限元仿真的发泡硅橡胶老化规律研究

通过力学性能测试得到发泡硅橡胶应力应变曲线,结合Ogden(Foam) 3阶超弹本构模型,建立发泡硅橡胶静密封系统的有限元仿真模型,得到大压缩量下发泡硅橡胶的von Mises应力及接触压力分布情况。仿真结果表明:大压缩量下发泡硅橡胶对称中心线位置的von Mises应力、接触压力值较大,在橡胶边缘和靠近限位环处接触应力数值有突增。开展140℃热空气老化试验,测定老化后发泡硅橡胶应力应变曲线,结合有限元仿真模型分析发泡硅橡胶老化后von Mises应力、接触压力的变化规律。结果表明:经过热空气老化后,在一定载荷下发泡硅橡胶等效应力和接触压力均呈增大的趋势。     

沿空切顶成巷段巷道围岩变形规律研究

以宏景塔一矿回采工作面为研究对象,基于切顶卸压无煤柱自动成巷技术原理,采用数值模拟计算和现场实测的方法,对该矿成巷段巷道围岩支承压力分布及围岩变形规律进行分析。研究结果表明:随着工作面向前推进,巷道围岩支承压力呈先增大后减小最后趋于稳定的变化趋势,支承压力稳定值为13.5 MPa;受工作面回采动压的影响,距离工作面70 m以内,锚索受力急剧增大到恒阻值、巷道围岩变形明显;距离工作面70~150 m,锚索受力迅速减小、巷道围岩变形逐渐变缓;在距离工作面150 m之后,锚索受力仅有微量变化、巷道围岩变形趋于稳定。因此确定支护体回撤保守安全位置为工作面后方150 m。工程实践表明:所设支护体回撤距离能够应对巷道围岩变形,成巷效果良好。     

瓦斯抽采集成旁通阀二位放水器研制

针对井下瓦斯抽采中原放水器配气阀安装不规范、双截止阀使用繁琐、工人劳动强度大等现状,研制了具有集成调控装置的放水器,能够实现一个阀门控制所有气路和水路,自主放水和负压排水,从源头上杜绝了瓦斯喷孔和水流溢出等情况,大大降低了职工的劳动强度,实现了井下抽采系统安全可靠运行。